Product Description

Shipping

$5 Flat Fee Ground.

All 3DOM merchandise is shipped via the United States Postal Service Priority Mail service. Upon payment authorization, orders ship within 24 to 36 hours of receipt. We inspect all items prior to shipping.

How it works

Before using your 3DOM E-Cigarette, it is strongly recommended that the 3DOM ePack and both e-cigarette batteries be fully charged prior to use to fully activate the batteries energy and ensure optimum performance throughout the batteries life. Please follow the following important steps:

Step 1: Charging your 3DOM E-Pack. Plug the wall charger into any standard 100V – 240V wall outlet. Simply connect the USB cable to the wall outlet plug and the other end to the underside of the E-Pack. The blue light on the wall charger will turn on indicating it is charging. The light will turn off when the E-Pack is fully charged. The 3DOM E-Pack will charge the e-cigarette batteries up to 5 times before requiring a recharge. Charge time for the E-Pack is approximately 1.5 to 2 hours for a complete charge.

Step 2: Charging your 3DOM E-Cigarette. Simply screw the 3DOM e-cigarette battery into the charge receptor in the E-Pack, the second slot from the right. The LED indicator on the side of the 3DOM E-Pack will light red when charging. You will also see the LED light on the tip of the e-cigarette battery will blink 5 times indicating it is screwed in correctly. There is no need to over tighten. When fully charged, the LED on the side of your 3DOM E-Pack will begin to flash. Unscrew the battery when fully charged to avoid draining power from the E-Pack. Charge time is approximately 1.5 to 2 hours.

Step 3: Attaching the 3DOM flavor cartridge. First attach your atomizer to a fully charged e-cigarette battery by screwing the two parts together. Once in place, take a flavor cartridge and slide it onto the atomizer. The coiled wire end of the atomizer will pierce the foil seal on the oil container within the cartridge. Once in place, give the cartridge a slight twist to ensure proper fit and positioning. 3DOM brand flavor cartridges are exclusive to the 3DOM e-cigarette. You should only use 3DOM brand cartridges and accessories with your 3DOM e-cigarette and 3DOM E-Pack. The 3DOM “Mini” cartridges will produce approximately 120 to 150 puffs per cartridge depending upon ones smoking habits. The 3DOM “Elite” cartridges will produce approximately 180 to 200 puffs per cartridge, depending upon ones smoking habits. 10 to 12 puffs is equivalent to 1 traditional tobacco cigarette.

Step 4: Using your 3DOM E-Cigarette. Now that your 3DOM e-cigarette battery is fully charged and your flavor cartridge is installed properly, it is time to start smoking. Simply place the filter end of your 3DOM e-cigarette to your lips, like a traditional tobacco cigarette, and inhale slow and steady for 3 seconds. This initiates the atomization of the oils within the cartridge which vaporizes the liquid and produces the vapor (smoke). As you inhale, the LED on the tip of the e-cigarette lights up to indicate you are inhaling properly. The light will go out once you stop inhaling. The deeper you inhale, the more vapor will be produced. It’s as simple as that. This is the only way your 3DOM brand electronic cigarette is designed to be used.

Please note that the time and frequency of your 3DOM smoking not exceed that of smoking a traditional tobacco cigarette in normal conditions.

3DOM flavor cartridges are available in either a rich tobacco flavor or minty menthol. Each flavor is available in the various levels of nicotine: High (16mg), Medium (11mg), Low (4mg) and none (0mg).

Storing your 3DOM E-Cigarette 3DOM Freedom: Your 3DOM Freedom eCig can store completely assembled within your 3DOM E-Pack. Simply insert your 3DOM e-cig, LED side down into the e-pack. Inserted correctly will have the cartridge end up.